#contents *Install&Setup [#k2a37f3f] **Install CentOS [#nb533909] :Step.1| Select "Install or Upgrade an existing system". #ref(install_fig1.png,,500x375,) :Step.2| Choose Skip #ref(install_fig2.png,,500x277,) :Step.3| Click Next #ref(install_fig3.png,,500x375,) :Step.4| Select Language. #ref(install_fig4.png,,500x375,) |LEFT:150|LEFT:300|LEFT:200|c |CENTER:Item|CENTER:Description|CENTER:Example|h |Language|Language for User Interface|"English"(default)| :Step.5| Select Keybord type #ref(install_fig5.png,,500x375,) |LEFT:150|LEFT:300|LEFT:200|c |CENTER:Item|CENTER:Description|CENTER:Example|h |Keyboard|Keyboard Type|"English"(default)| :Step.6| Choose type of devices. #ref(install_fig6.png,,500x375,) |LEFT:150|LEFT:300|LEFT:200|c |CENTER:Item|CENTER:Description|CENTER:Example|h |Type of devices|Type of devices|"Basic Storage Device"(default)| :Step.7| Click "Yes, discard any data". #ref(install_fig7.png,,500x375,) :Step.8| Setup host name and click "Configure Network" button. #ref(install_fig8.png,,500x375,) |LEFT:150|LEFT:300|LEFT:200|c |CENTER:Item|CENTER:Description|CENTER:Example|h |Host name|Host name. You can set as you like|"CentOS6.5"| :Step.9| Select "System eth0" and click "Edit" button. #ref(install_fig9.png,,500x375,) :Step.10| Check "Connect Automatically" and click "Apply" button. #ref(install_fig10.png,,500x375,) :Step.11| Check "Close" button. #ref(install_fig11.png,,500x375,) :Step.12| Check "Next" button. #ref(install_fig12.png,,500x375,) :Step.13| Setup timezone. #ref(install_fig13.png,,500x375,) :Step.14| Setup root password. #ref(install_fig14.png,,500x375,) :Step.15| Select Type of installation. |LEFT:150|LEFT:300|LEFT:200|c |CENTER:Item|CENTER:Description|CENTER:Example|h |Type of installation||"Use All Space"| :Step.16| Click "Write change to the disk". #ref(install_fig16.png,,500x375,) :Step.17| Choose Install Mode. #ref(install_fig17.png,,500x375,) |LEFT:150|LEFT:300|LEFT:200|c |CENTER:Item|CENTER:Description|CENTER:Example|h |Install Mode||"Software Development Workstation"| :Step.18| Wait for a while to finish installtion. #ref(install_fig18.png,,500x375,) :Step.19| Click "Reboot" button. #ref(install_fig19.png,,500x375,) :Step.20| Click Enter key. #ref(install_fig20.png,,500x375,) :Step.21| Click "Forward" button. #ref(install_fig21.png,,500x375,) :Step.22| Click "Forward" button. #ref(install_fig22.png,,500x375,) :Step.23| Enter user name, password and click "Forward" button. :Step.24| Click "Forward" button. #ref(install_fig24.png,,500x375,) :Step.25| Click "Finish" button. #ref(install_fig25.png,,500x375,) **Setup Network Adapter [#jed35f38] :Step.1| Login root user. :Step.2| Launch terminal from "Application"->"System Tools"->"Terminal". :Step.2| Open the following new file. # cd /etc/sysconfig/network-scripts # vi ifcfg-eth1 :Step.3| Edit as follows and save the file. Tools"->"Terminal". DEVICE=eth1 TYPE=Ethernet ONBOOT=yes BOOTPROTO=static HWADDR=99:99:99:99:99:99 # MAC Address which you can check Virtual Box Network setting NAME="System eth1" IPADDR=192.168.56.101 # as you like NETMASK=255.255.255.0 NETWORK=192.168.56.0 :Step.4| Execute the following command. # ifup eth1 # reboot Now, you can connect with SSH server specifying IP address as 192.168.56.101. *HowToUse [#g58bf7ef] :Step.1| xxx *Contributer [#e7e6a355] S.Yatsuzuka *Open Discussion [#idcc1c6e] If you have questions or comments, please share them below. We will improve the above information referring to your posting. #article