#contents *Prerequisite [#aa6f396b] (None) *Install&Setup [#x4b81906] :Step.1| Download Image file from [[Rasberry Pi Official Web site:https://www.raspberrypi.org/downloads/raspbian/]] :Step.2| Copy image file into micro SD card. :Step.3| Insert micro SD card into Rasberry Pi and boot it. :Step.4| Setup config. Expand Filesystem from "1 Expand Filesystem" in raspi-config menu. :Step.5| Change User password from "2 Change User Passowrd" in raspi-config menu. :Step.6| Enable Boot Desktop/Scratch from "3 Enable Boot Desktop/Scratch" in raspi-config menu. :Step.7| Change Locale from "4 Internationalisation Options" in raspi-config menu. :Step.8| Change Timezone from "4 Internationalisation Options" in raspi-config menu. :Step.9| Change Keyboard Layout from "4 Internationalisation Options" in raspi-config menu. :Step.10| Setup network interface. $ sudo vi /etc/network/interface auto lo iface l0 inet loopback auto eth0 allow-hotplug eth0 iface eth0 inet static address 192.168.1.1 netmask 255.255.255.0 auto wlan0 allow-hotplug wlan0 iface wlan0 inet manual wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf #auto wlan1 #allow-hotplug wlan1 #iface wlan1 inet manual #wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf *HowToUse [#z2fb0b80] **Remote Desktop from Windows PC [#s2701947] :Step.1| TBD Install xrdp $ sudo apt-get install xrdp Then you will be able to connect with Rasberry PI via "Remote Desktop". **Rasberry PI Camera [#y14618bf] :Step.1| Connect Rasberry PI Camera with Rasberry PI and launch raspi-config $ sudo raspi-config :Step.2| Enable Camera from "5 Enable Camera" in raspi-config menu. :Step.3| Reboot the system and check if the camera is recognized on Rasberry PI from the following commandline. $ raspistill -v -o test.jpg *Author [#s79ccab6] S.Yatsuzuka