Hello World from OSS Silicon Valley
HowToUse/UbuntuServer/14.04
_ Prerequisite
- VirtualBox installation (You can refer HowToUse/VirtualBox/4.3)
_ Install&Setup
_ Install UbuntuServer
(TBD)
_ Setup Network Adapter
- Step.1
- Edit network adapter definition file.
# vi /etc/network/interfaces
# The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 allow-hotplug eth0 iface eth0 inet dhcp # The secondary network interface auto eth1 allow-hotplug eth1 iface eth1 inet static address 192.168.56.101 netmask 255.255.255.0
- Step.2
- restart networking module
# /etc/init.d/networking restart
_ HowToUse
- Step.1
- xxx
_ Author
S.Yatsuzuka
Last-modified: 2015-08-17 (Mon) 02:41:34 (3147d)